MISA Installation Checklist

The following checklist must be completed by the Installer after the room has been installed.

Once completed, click SUBMIT and your Installation Checklist will automatically be sent to both SCK & SKOPE for warranty registration. You will also be emailed a copy to print out and keep onsite, as is required.

First Name *

Last Name *

Email Address *

Phone *

Phone 2

Approved Installer

Work Street Address

Suburb *

State *

Postcode *

Country / Region *

Australia

Fiji

New Zealand

Other

Other Country

Date of Installation

Compliance

The installation has been completed in accordance with:

Installation Compliance

MISA installation manual

Customer’s plans and specifications

Terms of any local authority consents

Relevant laws Regulations Building Codes and Standards

Installation Details

Tick to indicate the following key installation details have been adhered to:

Installation Checklist

There is adequate ventilation and airflow around the refrigeration unit

When adequate airflow is not available a suitable heat extractor has been installed

The room has been installed on a flat and level concrete surface as per the installation manual

Room inspection has been completed

he supplied roof supports have been used to support the room roof

Operation

Tick to indicate everything is operating correctly:

Operation Checklist

Airflow is unimpeded on the inside and outside of the room

The refrigeration unit is operating correctly

The door is sealing correctly

Heater element/s are operating correctly

Initial Performance

Please record the following information and tick the boxes once installation has been completed and the room powered up for the first time.

Note: Any issues or irregularities must be investigated and rectified to specifications. Ambient air on (air onto condenser) must not exceed 42°C.

The ambient air on temperature at condenser:

When first powered up

After 15 minutes

After 30 minutes